Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Olympia Chimney Chimney Cleaning & Sweep in Brentwood: What to Know First
We clean and sweep Olympia Chimney systems throughout Brentwood, NY, and we do it as an independent Olympia Chimney service provider - not a franchise, not a call center sending whoever’s available. A standard sweep on an Olympia fireplace runs $189-$269, and most Brentwood jobs are done in under two hours from ladder-up to hearth vacuumed. If you’ve got an Olympia chimney that hasn’t been touched in a few seasons, call (934) 935-3847 and Wendell or his crew will give you a straight answer on what it needs and what it doesn’t.
This page is for Brentwood homeowners with an Olympia Chimney fireplace, insert, or stove who want the flue cleaned right and want to know what they’re paying for. No middlemen, no bait-and-switch pricing. Just a sweep who’s been on these roofs since 1999.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia Ventis series - glazed creosote buildup in the elbow joints. The Ventis double-wall connector pipe has tight elbow runs where smoke slows down and creosote condenses. In Brentwood, where winter burns are long and hot, we see first-degree creosote turn to second-degree glaze at those elbows faster than on straight runs. Our fix is a powered rotary whip through the full connector before the brush stage, breaking the glaze so the standard sweep actually does its job.
- Olympia 6-inch stainless liners - soot packing at the bottom tee. Homes near Brentwood State Park with older stoves report the same thing: the liner looks fine from the top, but the tee at the base has packed soot cutting draft by half. We pull the cleanout cap and camera-check the tee on every Olympia liner sweep. Takes five extra minutes, catches the problem before your stove starts smoking back into the room.
- Olympia fireplace dampers - surface rust and sticking plates. Salt air off the South Shore pushes moisture down uncapped Olympia flues. The damper plate rusts, then the handle binds, and Brentwood owners either force it or stop using the fireplace. We drop the damper, wire-brush the plate, and apply a dry graphite film. If it’s warped, we say so and give you a replacement number that matches the Olympia specs rather than a universal plate that rattles for years.
- Olympia chimney caps - missing spark arrestor mesh. The factory mesh on older Olympia caps corrodes at the welds, usually on the side facing the prevailing wind. Squirrels find the gap in October. We stock stainless mesh sections that fit the standard Olympia cap frames, so you’re not buying a whole new cap for a six-inch tear.
- Olympia firebox panels - hairline cracking from thermal stress. This isn’t unique to Olympia, but its refractory panels are thinner than some competitors, and Brentwood’s freeze-thaw cycles don’t help anything on an exterior wall. Hairline cracks that haven’t shifted are cosmetic. Cracks wider than a dime with visible shifting mean the panel is compromised and needs replacement before your next fire. We’ll show you the camera footage either way.
Our Olympia Chimney Chimney Cleaning & Sweep Process
When you call us for an Olympia chimney sweep in Brentwood, here’s exactly what happens:
- 1
You get a live person on the phone. Wendell answers around the clock. We ask about your setup, your last sweep, and anything odd you’ve noticed. We give you a firm price before anyone gets in a truck.
- 2
We lay down drop cloths, stage the vacuum, and do a quick visual check. Before we put a brush anywhere, we look at the cap, the crown, and the firebox. On an Olympia, that means checking the damper plate and the bottom of the connector run.
- 3
We camera-check the flue. If the liner’s clean enough that a sweep would just stir up dust, we’ll tell you. No invented problems, no camera theatrics. Just a plain-English verdict.
- 4
We sweep with equipment sized to your system. For Olympia round flues, we use properly fitted poly brushes on rod or rotary where the glaze calls for it. First-degree creosote is a brush job. Third-degree is a glaze - we catch it in the camera step and adjust before we start scrubbing.
- 5
We clean the firebox, the damper, and the glass. Hearth cleaner than we found it, every time. That’s a Wendell thing and the crew knows it.
- 6
We walk you through the report. Camera photos or footage, what we cleaned, what we’d watch, and what - if anything - can safely wait. The 90-Day Done Right Promise goes on the invoice in writing.
What Olympia Chimney Chimney Cleaning & Sweep Costs in Brentwood
Here’s what Brentwood homeowners can expect to pay for Olympia chimney work with us:
- Standard sweep (fireplace or insert): $189-$269, depending on flue height and creosote stage.
- Sweep with camera inspection: Add $95-$150. We include camera with any Level 2 inspection.
- Glazed creosote removal (rotary whip): $150-$250 on top of the standard sweep.
- Damper rust treatment and cleaning: $60-$120 during the sweep.
- Spark arrestor mesh replacement: $85-$175 installed, depending on cap size.
What moves the price: creosote stage, roof pitch and access, and whether the connector pipe needs pulling. What doesn’t move it: anything a phone rep promises then forgets. The number we quote before the job is the number on the invoice. And if it’s over $200 in repairs, we take $40 off. Call (934) 935-3847 and we’ll tell you the straight price before anyone climbs a ladder.
Why Brentwood Homeowners Call Top Hat Chimney for Olympia Chimney Work
Wendell Pike started Top Hat Chimney in 1999, and he’s still the guy whose name goes on the work. That matters in a town like Brentwood, where you run into your sweep at the deli on Saturday. Wendell and his crew install and service Olympia Chimney products alongside DuraFlex, HeatShield, and Gelco, so when an Olympia part is backordered or overpriced, you get a real alternative instead of a shrug. Every job carries the 90-Day Done Right Promise: if it’s not right, one call brings us back. No trip charge inside our service county. Ten percent off always for seniors and veterans. And a live person answers the phone around the clock - it may well be Wendell. If it needs doing, we’ll do it right. If it doesn’t, we’ll tell you that too.
FAQs
Once a year, burn or no burn. Chimneys break in the off-season too, and that’s especially true in Brentwood, where humid summers and salt air work on uncapped flues while nobody’s looking. An annual sweep catches early creosote and surface rust before they become rebuilds.
No. A routine sweep and inspection by an independent chimney service does not void an Olympia Chimney warranty, provided the system is installed per manufacturer specs and we’re not modifying approved parts. If a warranty question ever comes up, we’ll tell you what Olympia needs documented and help you keep the paperwork straight.
Most Brentwood jobs run 90 minutes to two hours, from setup through cleanup. Add time if we’re pulling the damper or the connector pipe is glazed. Add more time if you’re making us coffee, but Wendell won’t turn it down.
Not necessarily. Dirty is a sweep problem. Cracked, shifted, or perforated is a liner problem. We camera-check the full run before we recommend anything, and we’ll show you the footage. Nobody gets a liner quote from us without seeing the evidence with their own eyes.
Most sticking Olympia dampers are rust and soot, not structural failure. We clean, treat, and test first. If the plate is warped or the hinge is gone, we’ll give you a replacement price and an honest timeline. Call (934) 935-3847 and we’ll take a look.
Written by Wendell Pike, Owner, Top Hat Chimney at Top Hat Chimney, serving Brentwood and nearby areas.





Before
After
Before
After
Before
After