Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterCopperfield Chimney Cap & Crown in Brentwood: What to Know First
We replace, repair, and install Copperfield chimney caps and crowns in Brentwood, and most jobs are done within a week of the first phone call. Cap replacement on a Copperfield system typically runs $185 to $420 depending on the size and whether the crown needs work, and you’ll know the exact number before any tools come off the truck. This page is for homeowners in Brentwood who own a Copperfield chimney system and want a straight answer about whether their cap or crown actually needs attention. Call (934) 935-3847 and you’ll get Wendell or a live person, not a call center.
How Copperfield Products Fail - and How We Fix Them
Copperfield builds a solid product line, but every brand has patterns. Here’s what we see on Brentwood rooftops:
- Copperfield Deluxe Series caps lose their mesh first. The expanded metal screen sits in direct weather and starts rusting at the spot welds, usually within five to seven years on Long Island. Once the mesh tears, squirrels and starlings get in. We replace the mesh or the whole cap and coat the new one before it goes on.
- The Copperfield Legacy multi-flue cap brackets don’t love Brentwood wind. We get a fair number of calls after nor’easters where a Legacy cap has shifted or lifted. The original clamp design holds fine in mild weather but can work loose when wind comes off the Great South Bay. We’ll either add a secondary bracket or switch you to a cap with a sturdier mounting system if the flue layout allows.
- Condensation pitting on Copperfield copper caps. Copper looks great for a couple of years, then Brentwood’s coastal moisture starts working on it. The pitting itself is cosmetic, but if the cap was installed without a proper drip edge, that water runs down onto the crown and starts spalling the concrete. We see this repeatedly on homes near Brentwood State Park where morning fog settles in.
- Crown hairline cracking on Copperfield standard-install chimneys. Copperfield’s own installation guide calls for a poured concrete crown with a minimum two-inch overhang, but a lot of original builds in Brentwood used a thinner mortar wash instead. That thin layer cracks within a few seasons. We rebuild the crown to the proper dimensions and seal it with a CrownCoat product that breathes.
- Copperfield stainless caps installed without a proper tension fit rattle in high wind. This one sounds worse than it is. The cap is fine, but whoever set it didn’t expand the legs fully into the flue tile. We reset the cap, check the taper, and the rattle disappears. If the flue tile itself is deformed, we’ll recommend a custom-fit cap rather than forcing a stock size.
Our Copperfield Chimney Cap & Crown Process
- 1
You call and talk to a person. Wendell or someone from his crew answers. We ask about the cap, the crown, what you’re seeing, and whether you’ve noticed water in the firebox.
- 2
We come out and look. On a Copperfield job we inspect the cap, the crown, the top three flue tiles, and the chase top if you have one. We bring a camera and show you footage of anything we find.
- 3
Plain-English verdict with a written number. If the cap just needs re-setting, you’ll hear that. If the crown is spalling and needs a rebuild, you’ll see the video and get a fixed price before any work starts.
- 4
Parts decision made together. For Copperfield caps, we use OEM when the flue is standard and the OEM part is still available at a sensible price. Where Copperfield’s line doesn’t carry a size or mounting style that fits, we’ll recommend a quality aftermarket cap from a brand we stock on the truck, and we’ll tell you why.
- 5
The work and the test. We’ll set or replace the cap, repair or rebuild the crown, and then do a draft test to confirm the chimney pulls the way it should. We’ll also check for any water staining inside the flue while we’re there.
- 6
Cleanup and the guarantee. We leave the hearth and roof cleaner than we found them. Every Copperfield cap and crown job in Brentwood gets the 90-Day Done Right Promise in writing. If anything isn’t right, one call brings us back.
What Copperfield Chimney Cap & Crown Costs in Brentwood
Here’s what we tell people over the phone, and that’s the number on the invoice:
- Copperfield cap replacement (standard single-flue, stainless or copper): $185 to $320 installed
- Multi-flue Copperfield cap, custom-fit: $340 to $520 installed
- Crown reseal with professional-grade CrownCoat: $150 to $275
- Full crown rebuild (poured concrete, proper overhang): $600 to $950
- Cap re-set or mesh replacement only: $95 to $180
The biggest price movers are whether the crown needs a full rebuild versus a reseal, and whether the cap has to be custom-fabricated for an odd flue size. You’ll also get $40 off any job over $200, and if you have another written estimate, we’ll give you a free second opinion on it. Call (934) 935-3847 and we’ll give you an exact number before scheduling.
Why Brentwood Homeowners Call Top Hat Chimney for Copperfield Work
We’ve been working on Brentwood chimneys since 1999. Wendell Pike owns the company and still climbs onto rooftops. He learned the mechanical side at Southwestern College in Chula Vista, and he has been hauling brushes and rods across Suffolk County long enough to know which capes and colonials near Brentwood State Park have recurring crown issues. Every Copperfield cap and crown job carries the 90-Day Done Right Promise in writing. Calls are answered by a live person at (934) 935-3847, day or night. We’re an independent Copperfield service provider, not a factory arm, and we stock the multi-brand backup that matters when a Copperfield part is backordered: DuraFlex, HeatShield, and Gelco are all on the truck. If it needs doing, we’ll do it right. If it doesn’t, we’ll tell you that too.
FAQs
No. As an independent Copperfield service provider, we can’t file or extend Copperfield’s own manufacturer warranty claims. What we do give you is a 90-Day Done Right Promise in writing on every cap and crown job, and we’ll point you to the right people if you have a manufacturer claim. Call (934) 935-3847 and we’ll walk you through what’s covered.
Most common Copperfield cap sizes and mesh replacements are available within a week. If a specific Copperfield part is backordered or discontinued, we’ll show you a comparable aftermarket option from a brand we stock locally and tell you the trade-offs before you spend a dime. We can usually get the right part on the truck within days, not months.
If the mesh is torn but the cap body is sound, we can replace just the screen for under $100. If the cap itself is rusted through, warped, or no longer seats properly on the flue, replacement is the smarter money, and a new Copperfield-compatible cap starts around $185 in Brentwood. The fixture cost is a small price for keeping water and animals out of a flue that would cost ten times that to repair. Call us and we’ll tell you which camp you’re in.
Usually within a few business days, but if there’s an active leak or animals are getting in, call (934) 935-3847 and we’ll do what we can to move things around. If it’s a scheduling emergency, Wendell himself may be the one who picks up, and he will give you a straight answer about when we can be there.
Look for hairline cracks that form visible lines across the top, spalling where small chunks of concrete have come away, or efflorescence, that chalky white residue that means water is moving through the crown and evaporating. On Copperfield chimneys with the original thinner mortar wash, any of those signs usually mean a rebuild is coming. We’ll bring a camera up and show you the footage, every time, no exceptions.
Written by Wendell Pike, Owner, Top Hat Chimney at Top Hat Chimney, serving Brentwood and nearby areas.